JVC FS-900BS1NCAM3 MULTIDYNE 3 CAMERA FIBER BACK PACKAGE PLUS FIBER BASE STATION – NEUTRIK OPTICALCON

$35,550.00

Free Shipping!
SKU: 13481 | MPN: FS-900BS1NCAM3 | UPC: 660000000066
Categories: , , Brand:
Description

Description:

The Multidyne FS-900 Fiber System from JVC offers bi-directional 3G-SDI 1080p/60 video feed-and-return for up to three JVC GY-HM890 camcorders using Neutrik opticalCON fiber cable and a single base station. Control, audio, sync, and intercom are also transmitted between camera and base station. The FS-900 base station has built-in gigabit Ethernet that works with the GY-HM890’s streaming capabilities to provide video-over-IP transmission as well. Three camera adapters and one base are included in the system (cameras are available separately).

The FS-900 base station is designed to integrate with existing systems, providing two HD/SDI outputs with return SDI and VBS connections (for analog signals), audio (RTS TW intercom module) and sync/control functions including bi-level /tri-level sync, teleprompter input, time code, GPI signals, and remote camera control input. The camera modules attach directly to the camera backs using a 68-pin interface, eliminating the need for external cable connectors. The base’s redundant power supply offers a maximum of 150W for each camera and its accessories.

Camera Compatibility
Designed to work with up to three JVC GY-HM890 ProHD camcorders and Neutrik opticalCON fiber optic cable

Key Features

  • Supports up to 1080p/60 video feed and returns
  • The camera adapter is designed to use either JVC VF-HP790 or generic SDI monitors as viewfinders
  • Provides both HDMI and SDI feeds for high-quality HD teleprompters
  • Video-over-IP and web-based camera remote control using gigabit Ethernet
  • Dual redundant power supplies
Specifications:
Fiber Optic
Fiber Cable Supported Neutrik opticalCON
Camera Adapter
Video Interface SDI (SMPTE ST259)
HD-SDI (SMPTE ST292)
3G-SDI (SMPTE ST424)
Data Rate Data Rate: 270 Mbps, 1.5 Gbps, 3 Gbps
Input/Output Level and Impedance 800 mVpp, 75 Ohms
Base Station
Video Interface SDI (SMPTE ST259)
HD-SDI (SMPTE ST292)
3G-SDI (SMPTE ST424)
HDMI (on return channel #3 only, for teleprompter use)
Data Rate Data Rate: 270 Mbps, 1.5 Gbps, 3 Gbps
Input/Output Level and Impedance 800 mVpp, 75 Ohms
Connectors 4 x BNC, 1 x HDMI (return channel # 3)
Genlock Video Input Number of Inputs: 1, plus loop output
Type: Analog black-burst, tri-level
Impedance: 75 Ohms
Camera Adapter: Internal
Base Unit Connector: 2 x BNC
Audio
Type Camera to Base: Embedded SDI
Base to Camera: Balanced analog line-level, mono
Number of Channels Camera to Base: Maximum supported by camera
Base to Camera: 2
Level Base to Camera: +4 dBu nominal, +24 dBu maximum
Connector Camera Unit: DB9
Base Unit: DB25
Intercom Number of Channels: 2
Interface: 2-wire or 4-wire
Compatibility: Clear-com
Camera Unit Connector: XLR-5
Headset Microphone Type: Dynamic
Microphone Impedance: 200 Ohms nominal
Base Unit Connector: DB25
Remote Control Number of Channels: 1 per camera
Camera Unit Connector: Internal
Base Unit: 3 x 6-pin mini-DIN
Ethernet Number of Channels: 1 per camera
Data Rate: 10/100/1000 Base-T
Camera Unit Connector: RJ45 Cat5e
Base Unit Connectors: 3 x RJ45 Cat5e
Timecode Number, Base to Camera: 1 per camera
Number, Camera to Base: 1, from camera # 1 only
Inputs: Unbalanced, 15 Vpp max
Outputs: Unbalanced, 3 Vpp
Camera Unit Connector: Internal
Base Unit: BNC
Tally / GPIO Number, Base to Camera: 3 per camera (red, green, spare)
Number, Camera to Base: 1 per camera
Inputs: Short to GND or TTL low to activate
Outputs: Relay contact closure (30 V, 2 A max)
Camera Unit Connector: DB15 Base Unit Connector: DB25
Operating Wavelength Operating Wavelength: 1471-1611 nm
Transmitter Laser Output Power: 0 dBm (class 1 laser)
Receiver Sensitivity: -20 dBm
Fiber Compatibility: Single-mode
Optical Connector Types: opticalCON DUO, SMPTE 304M
Mechanical & Environmental
Operating Temperature & Humidity Operating Temperature & Humidity:
32-122°F (0-50°C)
0-95% relative humidity

Remote Power: Hybrid fiber connector
Battery Mount

Power Input Base Unit: 9-250 VAC, 50-60 Hz, IEC320, universal input
Camera: Remote power
Hybrid Fiber Connector: Local power
Battery Mount: Anton Bauer or optional V-mount
Dimensions (HxWxD) Camera Adapter: 8.2 x 6.7 x 4.2″ (20.8 x 17 x 10.7 cm)
Base Unit: 3.5 x 19 x 16″ (8.9 x 48.3 x 40.6 cm) (2 RU)

Product Highlights:

  • opticalCON Transmission to GY-HM890
  • Multiple 3G-SDI 1080p/60 Inputs/Outputs
  • One Base Station Supports Three Cameras
  • Control, Audio, Sync & Intercom Signals
  • Video-over-IP & RC Via Gigabit Ethernet
  • Redundant Power for Up to Three Cameras
  • Both HDMI & SDI Teleprompter Feeds
  • Allows Use of SDI Monitors as Viewfinder
0/5 (0 Reviews)
Additional information
Weight 26.84 lbs
SHOP NOW!