Wendt X5 5-Channel Portable ENG/EFP Field Mixer

SKU: C1057-419


Out of stock

Sold By: AV Gear
Description Description:

Does not include power supply or batteries

Wendt X5VU Specs

Inputs Line / Mic(switchable): 5-Balanced XLR Inputs
Output Line / Mic(switchable): 2-Balanced XLR Outputs
Line / Mic(switchable): 2-TA3m mini XLR Outputs
Mic Out: Stereo 3.5mm mini jack 50dB below line levels
Monitor/Headphone Out Phones: Stereo 6.5mm 1/4″ Phone
ALT I/O A and B Tape Returns: 2-Stereo 3.5mm mini jack inputs
Link Input/Output Multi-pin Accessory Connection
Impedance not specified by manufacturer
Gain 10dB, 20dB and 0dB switchable attenuation
Hum & Noise EIN-128dBV
Frequency Response 20Hz – 20kHz
Distortion Less than 0.1% THD
Metering Stereo VU Meters with 12 second illumination switch
Controls Channel Input: Rotary level control, channels 1-5
PFL Switches: Momentary Switches
Pan Switches: Channels 1 through 5(right, center and left)
Ref. Tone: 0dBVU 400Hz low distortion sine wave
Battery Test: Indicates remaining battery life
RTN-A / RTN-B Mix : Tape Return Switches
L Stereo R Switch: Outputs audio at Left or Right Channels, or in Stereo
Preamplifier Gain: 3-position attenuation of 10dB, 20dB and 0dB
Phantom Power: 3-position 48V, 12T and DYN(dynamic)
Low Cut Filters: 3 position switch, 140Hz, 20Hz and 100Hz at 12dB per octave
VU Meter IlluminationMomentary Switch
Input Mode Switches(ch. 1-5): allows Line or Mic level input signal
Control Voltage Out No
Phantom Power 48V, 12T Supported
Operating Temperature -20 to +70 degrees C