CHAUVET Professional COLORado PXL Bar 16 RGBW LED Moving Batten Light

The two fixtures share the same 45 W quad-color RGBW LEDs, IP65 housing, motorized tilt, and 5.8° to 47.9° zoom. The Bar 16 doubles the pixel count to sixteen LEDs and adds a second control zone. This gives you finer pixel mapping and more layered effects across a longer bar.

The COLORado PXL Bar 16 is aimed at touring, festival, and architectural production, indoors or out. Its IP65 rating and high-output pixel effects make it a fit for large stage borders, audience-facing looks, and broadcast work where flicker-free output matters.

Each fixture pulls up to 790 W at 120 V, which rules out power-linking on a 120 V circuit. On a 208 V or 230 V circuit, you can link up to three units through the TRUE1-compatible Seetronic Powerkon IP65 ports, so most large rigs are wired at higher voltage.

Each unit ships with a Seetronic Powerkon IP65 power cable and two Omega brackets with mounting hardware, which covers basic truss hanging. For a full rig, you will usually add clamps, IP-rated powerCON and etherCON cables, DMX cabling, and a flight case for transport.

Yes. The batten speaks DMX, RDM, sACN, Art-Net, and Kling-Net, which lets it drop into most professional pixel-mapping setups. RDM adds remote addressing and troubleshooting across the network without touching each fixture by hand.

The IP65 rating covers temporary outdoor and wet use, and a pressure-equalizing M12 GORE valve manages moisture and temperature swings between -4°F and 113°F. It is rated for the run of an outdoor show rather than permanent, unsheltered installation.

The chassis is designed for edge-to-edge mounting, and butting units together holds a consistent pixel pitch between fixtures. That keeps long continuous runs looking like one unbroken array with no visible gap at the seams.

Yes. Selectable PWM frequencies of 600 Hz, 1,200 Hz, 2,000 Hz, 4,000 Hz, 6,000 Hz, and 15,000 Hz give flicker-free output across film, IMAG, and broadcast shutter speeds. You can match the PWM setting to the camera to clear rolling-shutter banding. Pair it with other stage lighting in a matched rig.

Every COLORado PXL Bar 16 is tested and inspected by an industry professional before it ships. Each listing describes the unit’s condition, and purchases are backed by AVGear's return window.

Yes. AVGear sells the COLORado PXL Bar 16 as inspected pro AV gear, available new in box when stock comes in, as well as pre-owned, with current price and availability shown on the product page. Add an available unit to your cart to check out directly, use the financing option for business purchases, or watch our equipment auctions for another way to buy.