AVGear's Next Auction Opens in April! Click Here to Learn More!

🔥 AVGear Deal Zone 🔥

Hot deals. Big savings. Limited quantities.

Chauvet

CHAUVET DJ DMX-4LED 4-Channel Dimmer Pack

$209.99

It’s a 4-channel dimmer/relay pack providing DMX control for on/off or dimming to units not equipped with DMX on their own. The fixture is optimized for use with small LED fixtures to prevent ghosting and flickering. Each of the 4 sets of outlets (duplex) can be set to any DMX address and independently set as a dimmer or relay. Sixteen user-selectable chase patterns make programming a breeze.

View Product Features

• 4-channel dimmer/switch pack with up to 5 amps per channel (15A max)
• Auto on/off when DMX is detected or removed
• Provides DMX control for on/off or dimming to non-DMX fixtures
• Built in circuitry generates a phantom load to prevent ghosting and flickering in LED fixtures
• Custom looks at your fingertips with 16 built-in, configurable chases
• Easy control using standalone mode or DMX control
• Increase flexibility by setting each channel as a dimmer or switch"

In stock

Scroll below to see our current inventory for this item.

Already own this item and want to sell it?

About the CHAUVET DJ DMX-4LED 4-Channel Dimmer Pack

The CHAUVET DJ DMX-4LED is a compact and robust four-channel DMX dimmer pack specifically engineered for controlling the intensity of low-voltage LED lighting fixtures in mobile and installed applications. This unit provides a reliable interface between a standard DMX-512 lighting controller and up to four independent channels of LED lighting, such as PAR cans, strip lights, or color changers that require constant voltage DC power. Each channel features a high-capacity MOSFET dimming circuit that delivers smooth, flicker-free dimming from 0-100%, allowing for precise control over the brightness and fade curves of connected fixtures. Its design is centered on simplicity and durability, making it a staple for DJs, small venue operators, and event lighting technicians who need to add professional dimming control to their LED-based setups.

The dimmer pack offers multiple control options for maximum flexibility. It can be operated via a standard DMX-512 signal from any lighting console, slaved to another unit in a master/slave configuration, or used in standalone sound-active mode where the built-in microphone triggers pre-programmed chases based on ambient music. Front-panel controls include individual channel level knobs for manual override and testing, along with mode selection and address setting switches. The rear panel houses robust terminal block connectors for wiring fixtures, a standard IEC power inlet, and 3-pin XLR connectors for DMX input and output to facilitate daisy-chaining in larger systems.

Built into a rugged steel chassis, the DMX-4LED is designed to withstand the physical demands of transport and frequent use. Its efficient design generates minimal heat, and the unit is typically convection-cooled without the need for internal fans, ensuring silent operation—a critical feature for noise-sensitive environments like theater or video shoots. By providing a dedicated, high-quality dimming solution for LED loads, the CHAUVET DJ DMX-4LED fills an essential role in the signal chain, empowering users to achieve dynamic, professionally controlled lighting looks without the complexity or cost of larger, more powerful dimming systems.

Key Features

• 4-channel dimmer/switch pack with up to 5 amps per channel (15A max)
• Auto on/off when DMX is detected or removed
• Provides DMX control for on/off or dimming to non-DMX fixtures
• Built in circuitry generates a phantom load to prevent ghosting and flickering in LED fixtures
• Custom looks at your fingertips with 16 built-in, configurable chases
• Easy control using standalone mode or DMX control
• Increase flexibility by setting each channel as a dimmer or switch"

CHAUVET DJ DMX-4LED 4-Channel Dimmer Pack Specs

Dimmer Channels and Output
Channels
4
Dimmer Type
MOSFET (for LED/Constant Voltage)
Max Load per Channel
5A @ 12V DC or 24V DC
Control and Operation
Control Protocols
DMX-512, Master/Slave, Sound-Active
DMX Channels
4 (1 per dimmer)
Standalone Modes
Manual, Sound-Active Programs
Input and Output Connections
Fixture Output
Screw Terminal Blocks
DMX Connectors
3-Pin XLR In & Out
Power Input
IEC Cable (Detachable)
Physical and Electrical
Chassis Material
Steel
Cooling
Convection (Fanless)
Power Supply
Internal Switching
User Interface and Setup
Front Panel Controls
Per-Channel Knobs, Mode Select
Address Setting
DIP Switches
Indicator Lights
Power, Signal, Clip

Key Features

• 4-channel dimmer/switch pack with up to 5 amps per channel (15A max)
• Auto on/off when DMX is detected or removed
• Provides DMX control for on/off or dimming to non-DMX fixtures
• Built in circuitry generates a phantom load to prevent ghosting and flickering in LED fixtures
• Custom looks at your fingertips with 16 built-in, configurable chases
• Easy control using standalone mode or DMX control
• Increase flexibility by setting each channel as a dimmer or switch"

Make an offer
Make an offer
Make an offer