Stay Tuned for AVGear's Next Auction! Learn More

🔥 AVGear Deal Zone 🔥

Save on Pro AV Gear. Limited quantities.

Shop Now
Camco

Camco Vortex 6 3000W/2 Ohm Power Amplifier

$999.95

The Camco Vortex 6 is a professional-grade power amplifier that represents the pinnacle of German engineering in the Vortex Series, delivering exceptional performance in a remarkably compact and lightweight 2RU chassis. This powerful amplifier combines classic circuit designs with advanced switched-mode power supply technology and an ingeniously designed microprocessor controller, allowing it to extract maximum performance while maintaining safe operating limits. With the ability to deliver 3000 watts per channel into 2 ohms and stability down to 1 ohm loads, the Vortex 6 provides the extensive power reserves required for demanding live sound reinforcement, touring applications, and permanent installations.

What truly distinguishes the Vortex 6 is its uncompromising commitment to audio integrity, delivering total precision and transparency through careful design that eliminates sound-deteriorating drawbacks from the start. This is evidenced by its exceptional low distortion values and excellent signal-to-noise ratio. The amplifier features comprehensive protection circuits including inrush-current limitation, DC protection, temperature monitoring, and intelligent power transistor control, all operating to ensure reliable performance under the most demanding conditions. For touring professionals and system integrators requiring remote monitoring and control capabilities, the Vortex 6 can be upgraded with advanced controller modules and network solutions.

View Product Features
  • German engineered Class H topology with Bipolar output transistors for superior fidelity.
  • Microprocessor controlled SMPS optimizes performance while maintaining safe operating limits.
  • Switchable peak limiter with 3 steps prevents speaker damage during high output events.
  • Two temperature controlled axial fans ensure quiet operation under varying load conditions.
  • 12-bit DCA volume controls eliminate pot scratchiness and provide perfect logarithmic taper.
  • Rear panel CAI interface enables remote control and system monitoring capabilities.
Out of Stock
0 in stock

Once stock replenishes, inventory will display below.

In-Stock Inventory

Already own this item and want to sell it?

Click here to sell your item

About the Camco Vortex 6 3000W/2 Ohm Power Amplifier

The Camco Vortex 6 is a professional dual channel power amplifier that represents the pinnacle of German engineering in the Vortex Series. Delivering 3000 watts per channel into 2 ohms with stability down to 1 ohm loads, this amplifier provides the extensive power reserves required for demanding live sound reinforcement, touring applications, and permanent installations. The Vortex 6 achieves this exceptional power output in a remarkably compact and lightweight 2RU chassis weighing only 12.4 kilograms.

The secret to the Vortex 6 lies in the successful combination of classic circuit designs with advanced switched mode power supply technology and an ingeniously designed microprocessor controller. This sophisticated control system makes it possible to extract maximum performance from the output circuitry while staying well below safe operating limits. The amplifier utilizes a Class H output topology with Bipolar transistors, receiving power from three symmetrical supply rails generated by the microprocessor controlled SMPS. Should the system detect abnormal conditions in the amplifier or connected load, the supply rails can be lowered or shut down completely to protect both the amplifier and speakers.

Audio fidelity remains uncompromised throughout this advanced architecture. The Vortex Series is renowned for exceptional low distortion values and an excellent signal to noise ratio, achieved through careful design that eliminates sound deteriorating drawbacks from the start. The amplifier features comprehensive protection circuits including inrush current limitation, DC protection, over temperature monitoring, SOA protection, and intelligent power transistor control. A switchable 3 step peak limiter provides additional speaker protection when needed. For touring professionals and system integrators requiring remote monitoring and control, the Vortex 6 can be upgraded with advanced controller modules and network solutions via EtherSound or CobraNet, converting the amplifier into a complete loudspeaker management system.

Key Features

  • German engineered Class H topology with Bipolar output transistors for superior fidelity.
  • Microprocessor controlled SMPS optimizes performance while maintaining safe operating limits.
  • Switchable peak limiter with 3 steps prevents speaker damage during high output events.
  • Two temperature controlled axial fans ensure quiet operation under varying load conditions.
  • 12-bit DCA volume controls eliminate pot scratchiness and provide perfect logarithmic taper.
  • Rear panel CAI interface enables remote control and system monitoring capabilities.

Camco Vortex 6 3000W/2 Ohm Power Amplifier Specs

Power Output Specifications (Stereo Mode)
8 Ohms per Channel
1300 Watts
4 Ohms per Channel
2100 Watts
2 Ohms per Channel
3000 Watts
Max Continuous Power (4 Ohms, 1% THD)
2259 Watts
Peak Reserves (4 Ohms)
2964 Watts
Power Output Specifications (Bridge Mono Mode)
8 Ohms Bridged
4200 Watts
4 Ohms Bridged
6000 Watts
16 Ohms Bridged
2700 Watts
Amplifier Topology & Circuit Section
Output Circuitry
Bipolar Transistor, Class H
Power Supply
Microprocessor controlled SMPS
Cooling System
2 temperature controlled axial fans
Operating Modes
Stereo, Bridge Mono, Parallel Mono
Damping Factor (8 Ohms, 1kHz)
> 400
Audio Performance Specifications
Frequency Response
20 Hz - 20 kHz ±0.15 dB
Total Harmonic Distortion
0.3% at full rated power into 4 Ohms (0.1% typical)
Signal to Noise Ratio (unweighted)
113 dB
Signal to Noise Ratio (A weighted)
115 dB
Dynamic Range (Referenced to 18dB crest factor)
115 dB (A weighted)
Channel Separation
> 70 dB (typical)
Crosstalk
> 80 dB @ 1kHz

Key Features

  • German engineered Class H topology with Bipolar output transistors for superior fidelity.
  • Microprocessor controlled SMPS optimizes performance while maintaining safe operating limits.
  • Switchable peak limiter with 3 steps prevents speaker damage during high output events.
  • Two temperature controlled axial fans ensure quiet operation under varying load conditions.
  • 12-bit DCA volume controls eliminate pot scratchiness and provide perfect logarithmic taper.
  • Rear panel CAI interface enables remote control and system monitoring capabilities.
Make an offer
Make an offer
Make an offer