AVGear's Next Auction Opens in April! Click Here to Learn More!

🔥 AVGear Deal Zone 🔥

Hot deals. Big savings. Limited quantities.

Martin Audio

Martin Audio SXC118 18" Compact Cardioid Subwoofer System, Ground-Stack Version

$5,250.00

Increase the impact of your system's low end with Martin's SXC118 cardioid 18" subwoofer system. The compact ground stack version of the SXC118 features an 18" forward-facing driver and a 14" rear-facing driver that together produce a cardioid output from the sub. This design combats low-end feedback, frequency overlap, and cancellation issues encountered in live music applications. You'll also enjoy increased efficiency and an additional 2dB of output compared to a conventional single 18" sub.

With your bass frequencies directed forward as opposed to everywhere, your entire system will benefit from a more accurate response. This translates to a more impactful system output for the audience. Your FOH engineer will also thank you.

The SXC118 is an ideal partner for WPM line arrays or Martin Audio point source systems(sold separately) where low-frequency pattern control is required. It can be used singly, stacked, or flown individually using threaded flying inserts.

Multi-laminate birch ply with a rugged poly coating form the cabinet for the 14" and 18" speakers that are protected from the outside world by perforated steel grilles to ensure reliability show after show. Interlocking skids prevent movement when stacked and a threaded plate in the top surface facilitates pole-mounting of up to 4 WPM enclosures or a single point source loudspeaker.

View Product Features

  • Compact, cardioid subwoofer
  • Front facing 18” (460mm)/4” (100mm) voice coil driver
  • Rear facing 14” (356mm)/3.5” (88mm) voice coil driver
  • Cardioid dispersion pattern
  • 28dB rear rejection at 75Hz
  • High output capability
  • Tour-grade plywood enclosure with flying inserts
In stock

Scroll below to see our current inventory for this item.

Already own this item and want to sell it?

About the Martin Audio SXC118 18" Compact Cardioid Subwoofer System, Ground-Stack Version

The recommended iK42 amplifier optimises the DSP parameters for front and rear drivers to maximise the rear rejection — from 21dB at 43Hz to 28dB at 75Hz. This keeps low frequencies away from stages, turntables and walls as well as reducing reverberant energy in the room, greatly improving the system’s low frequency response accuracy and impact.

In front of the enclosure, the output from the two drivers is additive, giving an extra 2dB of output when compared with a conventional 1 x 18” subwoofer.

The enclosure is constructed from plywood and finished with a hard-wearing textured paint. It is equipped with four grab handles and foam-backed perforated steel grilles protect the front and rear drivers. It can be used individually, stacked or flown individually by means of threaded flying inserts

The SXC118 is an ideal partner for WPM and WPS line arrays or our range of point source loudspeakers where low frequency pattern control is required. Interlocking skids prevent movement when stacked and a threaded plate in the top surface facilitates pole- mounting of up to 4 WPM enclosures or a singular point source enclosure. The product is supplied as standard without castors but they can be purchased as an accessory.

By adding the input board cover accessory, the subwoofer is fully weather resistant and suitable for permanent outdoor usage.

Key Features

  • Compact, cardioid subwoofer
  • Front facing 18” (460mm)/4” (100mm) voice coil driver
  • Rear facing 14” (356mm)/3.5” (88mm) voice coil driver
  • Cardioid dispersion pattern
  • 28dB rear rejection at 75Hz
  • High output capability
  • Tour-grade plywood enclosure with flying inserts

Martin Audio SXC118 18" Compact Cardioid Subwoofer System, Ground-Stack Version Specs

TYPE
Compact, cardioid subwoofer
FREQUENCY RESPONSE
43Hz – 150Hz ±3dB, -10dB @ 34Hz
DRIVERS
18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone 14” (356mm)/3.5” (88mm) voice coil, long excursion, neodymium magnet, waterproof cone
RATED POWER
18”: 1000W AES, 4000W peak 14”: 800W AES, 3200W peak
SENSITIVITY
104dB
MAXIMUM SPL
140dB peak
NOMINAL IMPEDANCE
18”: 8Ω 14”: 8Ω
DISPERSION (-6dB)
Cardioid
ENCLOSURE
Multi-laminate birch and poplar ply
FINISH
Textured black paint
PROTECTIVE GRILLE
Black HEX perforated steel
CONNECTORS
2 x NL4
PIN CONNECTIONS (INPUT)
18”: +1, -1; 14”: +2, -2
PINS CONNECTIONS (LINK)
18”: +1, -1; 14”: +2, -2
FITTINGS
Two skids on base, with mating channels on top M20 top-mounted thread plate for pole mounting Two bar handles on each side Four fittings for optional transit cover 16 x M10 Mounting Points 16 x M8 inserts for optional castors Two bar handles on each side
DIMENSIONS (INCL SKIDS)
(W) 650mm x (H) 603mm x (D) 812mm (940mm incl castors) (W) 25.6in x (H) 23.7in x (D) 32in (37in incl castors)
WEIGHT
69kg (152lbs) 73kg (161lbs) incl castors

Key Features

  • Compact, cardioid subwoofer
  • Front facing 18” (460mm)/4” (100mm) voice coil driver
  • Rear facing 14” (356mm)/3.5” (88mm) voice coil driver
  • Cardioid dispersion pattern
  • 28dB rear rejection at 75Hz
  • High output capability
  • Tour-grade plywood enclosure with flying inserts
Make an offer
Make an offer
Make an offer