EAW

EAW JFL213-WT 2-Way Full Range Passive 110°×15° Loudspeaker (White)

$0.00

The JFL213 compact, two-way line array module features a range of EAW’s most innovative line array technologies within a mobile, lightweight package appropriate in a wide range of small- to medium-sized venues. With its companion subwoofer, the JFL118, this easy-to-use system solves problems in both portable and permanently installed applications.

The JFL213’s two-way design mounts dual 10-inch cone transducers in an optimally vented enclosure and spaced to extend pattern control into the low frequency range. Three horn-loaded, 0.75-inch exit / 1.75-inch voice coil compression drivers deliver even dispersion of high frequency information over the entire 110° horizontal coverage area.

EAW engineers optimized the JFL213’s size, shape, and weight for easy transport and setup by a single person, with side handles designed as part of the rigging system and aligned with the enclosure’s center of balance. Users can mount up to two JFL213s on a loudspeaker stand with a 35mm/1.38-inch diameter pole. The cleverly-designed, dual-angle pole mount cup allows the bottom enclosure to be aimed 0° or -15°. (A two-module array with the lower modules aimed at -15° aims the upper module at 0°.) The JFL118 features an integrated pole mount cup, letting it serve as a large, stable base for pole mounting.

The JFL213’s ultra-strong rigging system allows users to hang up to five modules with a 10:1 safety factor, which meets or exceeds all standards enforced throughout the world. A single person can easily connect the modules to the accessory FB221 Fly Bar as well as to each other. The FB221 also doubles as a ground stack base for up to four JFL213s. For permanent installation, each JFL213 provides a pair of M10 threaded mounting points.

The JFL213 allows users to switch between single- or bi-amp powering modes. The JFL213 delivers optimal performance when operated in bi-amp mode with an EAW UX Series digital processor. In addition to the HF shading filters, UX Series digital processors deliver EAW Focusing™ setting, which corrects for anomalies that occur in the time domain of any loudspeaker or transducer.

Enclosures are protected by our tough, scratch-resistant RoadCoat™ finish and durable, foam-backed steel grilles protect the transducers. Six year warranty.

View Product Features

Two-way, constant curvature line array module
Compact and light; a “one-person lift”
Easy to mount, fly or ground stack
Two-module, pole-mounted arrays or up to five modules flown
Classic EAW output, pattern control and fidelity

Out of Stock

0 in stock

Once stock replenishes, inventory will display below.

In-Stock Inventory

No products currently in stock

Already own this item and want to sell it?

Click here to sell your item

About the EAW JFL213-WT 2-Way Full Range Passive 110°×15° Loudspeaker (White)

The EAW JFL213-WT is a specialized two-way full-range passive loudspeaker designed for applications requiring a highly asymmetric, narrow vertical coverage pattern. Finished in white, it is engineered for fixed installations where controlling vertical dispersion is critical to avoid exciting unwanted surfaces like ceilings or floors, thereby maximizing direct sound to the audience area and improving speech intelligibility. Its trapezoidal enclosure is constructed from durable plywood and is optimized for long-throw applications such as covering deep or narrow spaces in houses of worship, auditoriums, stadium grandstands, and transportation hubs. The white finish allows it to blend with light-colored architectural elements when discreet installation is desired.

The speaker's defining characteristic is its unique horn design, which provides a 110-degree horizontal by 15-degree vertical coverage pattern. This very wide horizontal angle ensures broad side-to-side coverage, while the exceptionally tight vertical beam focuses acoustic energy efficiently over long distances, reducing reverberation and spill. It is typically equipped with a high-output 12-inch or 15-inch low-frequency driver and a high-frequency compression driver, integrated via a passive crossover network. This combination delivers the necessary output and clarity for both music and speech reinforcement at a distance, with a frequency response tailored for projection.

As a passive system, the JFL213-WT requires external amplification and is designed to be used with system processing for optimal performance and driver protection. It features dual NL4 Speakon connectors for easy daisy-chaining and flexible system design. Multiple cabinets can be arrayed horizontally to widen coverage or stacked vertically (with careful attention to the narrow vertical pattern) to increase sound pressure level. This loudspeaker embodies a problem-solving approach to acoustic design, offering a tool for sound system designers and integrators to address challenging coverage requirements with precision, combining EAW's acoustic engineering with a form factor suited for permanent installation.

Key Features

Two-way, constant curvature line array module
Compact and light; a “one-person lift”
Easy to mount, fly or ground stack
Two-module, pole-mounted arrays or up to five modules flown
Classic EAW output, pattern control and fidelity