The SC3010 is a main studio monitor designed for farfield listening in professional recording and mastering studios, film and television post-production, and cinema sound engineering.

While both share the same 5-inch midrange driver and AMT RS6 tweeter, the SC3010 features a smaller 10-inch SilverCone woofer, as opposed to the 12-inch woofer found on the SC3012.

No, the SC3010 is fully active. It houses three separate Class-D amplifiers—800W for the woofer, 250W for the midrange, and 250W for the tweeter—eliminating the need for external amp racks.

Yes, the silver module holding the midrange driver and tweeter can be uncrewed and rotated 90 degrees, allowing you to position the monitor either vertically or horizontally without compromising the stereo image.

Yes, the SC3010 is designed to accommodate in-wall installations. Users can select a specific "in-wall" filter mode using the DSP controls and block the rear bass port with the supplied high-density foam plugs.

The monitor converts incoming analog signals into digital using a Burr-Brown 24-bit/192 kHz A/D converter, feeding a high-resolution DSP engine. This engine provides precise control over volume, high/low shelf filters, and desk filters to compensate for room acoustics.

All adjustments are made via the SMART-knob on the front panel—a single push-and-turn rotary encoder with an LED ring that displays volume levels and filter settings.

Your calibration settings are automatically saved and retained even when the monitor is powered down. You can also use physical dip switches on the back panel to lock the volume and filter settings to prevent accidental adjustments.

The monitor is equipped with one electronically balanced XLR input and one unbalanced RCA input, making it compatible with a wide variety of professional and consumer audio gear.