Ferrofish

Ferrofish Verto64 64-Channel ADAT/Dante Format Converter

$1,499.00

FERROFISH VERTO64 – 64×64 ADAT<>Dante Converter

Dante is the de-facto standard for networking audio devices. With the VERTO64 it is now possible to integrate up to 64 x 64 channels via ADAT I/O’s into a Dante network in the simplest way. No matter which ADAT device – the VERTO64 makes all 64 x 64 channels immediately available “plug and play” in the Dante network.

The ultra compact device offers a total of 16 optical ADAT TOSLINK jacks: 8 for transmitting from ADAT to Dante and another 8 jacks for the return path.

On the Dante side there are two RJ45 jacks, prepared for redundant operation. The VERTO64 supports up to 96kHz sample rate, MIDI jacks for firmware updates and BNC word clock jacks for external synchronization.

View Product Features

Converts ADAT to Dante & Dante to ADAT
64×64 ADAT channels on 8×8 optical TOSLINK ports
64×64 Dante channels via dual Ethernet ports with redundancy (pri/sec)
MIDI I/O for firmware updates via MIDI-USB interface
Word clock I/O on BNC with factory-set termination of the input (75 Ohm)

In stock

Scroll below to see our current inventory for this item.

In-Stock Inventory

New
Verto 64

Ferrofish Verto64 64-Channel ADAT/Dante Format Converter

$1,499.00

View Product

Already own this item and want to sell it?

Click here to sell your item

About the Ferrofish Verto64 64-Channel ADAT/Dante Format Converter

Dante is the de facto standard for networking audio equipment. With the Verto 64 it’s now possible to easily integrate up to 64 x 64 channels via ADAT into a Dante network. No matter which ADAT device you use – the Verto 64 makes all channels immediately avalilable in the network: “plug and play”.

The ultra compact device has 16 ADAT connectors: 8 for transmitting, and 8 for receiving digital data (8 channels each).

On the Dante side there are two RJ45 sockets, also prepared for redundant operation. The Verto 64 supports up to 96kHz sample rate, MIDI jacks for firmware update and BNC wordclock jacks for external synchronization.

Key Features

Converts ADAT to Dante & Dante to ADAT
64×64 ADAT channels on 8×8 optical TOSLINK ports
64×64 Dante channels via dual Ethernet ports with redundancy (pri/sec)
MIDI I/O for firmware updates via MIDI-USB interface
Word clock I/O on BNC with factory-set termination of the input (75 Ohm)