Showing 1–12 of 230 results

  • whirlwind-connect-edb1-direct-box MAIN

    Whirlwind Connect EDB1 Direct Box

    $14.95

    Removed from Corporate Environment. Refer to Images.

    Add to cartLoading Done

    1 in stock

  • Whirlwind Switcher - Microphone _Line Level 8-channel DB25 I_O manual _auto switching 1 RU AB-8

    Whirlwind Switcher – Microphone Line Level 8-channel DB25 I/O manual auto switching 1 RU AB-8

    $752.00

    The AB-8 is an 8-channel, balanced, bidirectional signal switcher (1 in – 2 out or 2 in -1 out). Mic level audio, line level audio, and MIDI signals can be routed with the AB-8. The AB-8 auto-senses loss of input on the primary inputs, and automatically switches to secondary inputs for backup in live tracking…

    Add to cartLoading Done
  • Whirlwind Cable - AC Edison HBL5266C (15A male) to HBL5369C (20A female) W12-3 AC-515-000

    Whirlwind Cable – AC, Edison, HBL5266C (15A male) to HBL5369C (20A female) W12-3 AC-515-000

    Whirlwind Cable – AC Edison HBL5266C (15A male) to HBL5369C (20A female) W12-3 AC-515-000

  • Whirlwind Splitter - AES XLRF input dual XLRM isolated outputs AES-SP1X2

    Whirlwind Splitter – AES, XLRF input, dual XLRM isolated outputs AES-SP1X2

    $170.00

    The Whirlwind AES Splitter 1×2 is a passive unit that delivers two identical AES/EBU signals from a single stream. The design utilizes a dual secondary transformer on the input and a separate isolation transformer for each output. With the three-transformer circuit, the Whirlwind AES-SP1X2 maintains excellent data integrity and high amounts of isolation between outputs.

    Add to cartLoading Done
  • Whirlwind Back Box - 12 x 12 x 4 black powder coat BB12X12X4B

    Whirlwind Back Box – 12″ x 12″ x 4″, black powder coat BB12X12X4B

    $118.00

    These patent-pending wall frame assemblies with recessed panels provide greater protection for connectors while enhancing the appearance of your installation. Two sizes fit 8″ x 8″ and 12″ x 12″ standard NEMA type 1 electrical backboxes and there are two standard connector panel recess depths, 1″ and 2.5″.

    Add to cartLoading Done
  • Whirlwind Back Box - 8 x 8 x 4 black powder coat BB8X8X4B

    Whirlwind Back Box – 8″ x 8″ x 4″, black powder coat BB8X8X4B

    $87.00

    These patent-pending wall frame assemblies with recessed panels provide greater protection for connectors while enhancing the appearance of your installation. Two sizes fit 8″ x 8″ and 12″ x 12″ standard NEMA type 1 electrical backboxes and there are two standard connector panel recess depths, 1″ and 2.5″.

    Add to cartLoading Done
  • Whirlwind Transformer - BNC-XLRF 75-110 Ohm Canare BCJ-XJ-A10TR

    Whirlwind Transformer – BNC-XLRF, 75-110 Ohm, Canare BCJ-XJ-A10TR

    $77.56

    The Whirlwind 75-110Ohms BNC to XLR Female Canare Transformer is a cost-effective solution for long cable runs over coaxial cable as opposed to the attenuation of twisted pair at digital frequencies. It provides impedance matching between 75 Ohms and 110 Ohms, electrical isolation, transition of balanced/unbalanced circuit and reduction of hum and noise.

    Add to cartLoading Done
  • Whirlwind Transformer - BNC-XLRF 75-110 Ohm Canare BCJ-XJ-TRB

    Whirlwind Transformer – BNC-XLRF, 75-110 Ohm, Canare BCJ-XJ-TRB

    $52.70

    The Whirlwind XLR-F to BNC Canare Digital Audio Adapter is a cost-effective solution for long cable runs over coaxial cable as opposed to the attenuation of twisted pair at digital frequencies. It provides impedance matching between 75 Ohms and 110 Ohms, electrical isolation, transition of balanced/unbalanced circuit, and reduction of hum and noise.

    Add to cartLoading Done
  • Whirlwind Transformer - BNC-XLRM 75-110 Ohm Canare BCJ-XP-TRB

    Whirlwind Transformer – BNC-XLRM, 75-110 Ohm, Canare BCJ-XP-TRB

    $60.61

    The Whirlwind XLR-M to BNC Canare Digital Audio Adapter is a cost-effective solution for long cable runs over coaxial cable as opposed to the attenuation of twisted pair at digital frequencies. It provides impedance matching between 75 Ohms and 110 Ohms, electrical isolation, transition of balanced/unbalanced circuit, and reduction of hum and noise.

    Add to cartLoading Done
  • Whirlwind Stagebox - Medusa loaded with 12 WC3FQBK numbered 1-12 BK12NR

    Whirlwind Stagebox – Medusa, loaded with 12 WC3FQBK, numbered 1-12 BK12NR

    $328.00

    The Whirlwind Medusa Stage Box is a heavy-duty steel box that’s loaded with 12 XLR female inputs, but does not have a snake cable wired into it. It’s an ideal solution for someone who needs to make a custom snake, and wants a high-quality preassembled stage box for the project. Whirlwind has more than 30…

    Add to cartLoading Done
  • Whirlwind Stagebox - Medusa loaded with 16 WC3FQBK numbered 1-16 BK16NR

    Whirlwind Stagebox – Medusa, loaded with 16 WC3FQBK, numbered 1-16 BK16NR

    $452.00

    The Whirlwind Medusa Stage Box is a heavy-duty steel box that’s loaded with 16 XLR female inputs, but does not have a snake cable wired into it. It’s an ideal solution for someone who needs to make a custom snake, and wants a high-quality preassembled stage box for the project. Whirlwind has more than 30…

    Add to cartLoading Done
  • Whirlwind Stagebox - Medusa loaded with 20 WC3FQBK numbered 1-20 BK20NR

    Whirlwind Stagebox – Medusa, loaded with 20 WC3FQBK, numbered 1-20 BK20NR

    $486.00

    The Whirlwind Medusa Stage Box is a heavy-duty steel box that’s loaded with 20 XLR female inputs, but does not have a snake cable wired into it. It’s an ideal solution for someone who needs to make a custom snake, and wants a high-quality preassembled stage box for the project. Whirlwind has more than 30…

    Add to cartLoading Done