Showing 1–12 of 516 results

  • The Light Source Mega-Grid-Lock Diagonal Extra Large Silver MGDM-XL

    The Light Source Mega-Grid-Lock Diagonal, Extra Large, Silver MGDM-XL

    $51.48

    The new Mega-Gridlock Diagonal XL provides a solution for pipes that need to cross at varying angles. Multiple curved slots allow for precise positioning from 0˚ to 90˚. The Mega-Gridlock Diagonal XL works with 2 bolts or 4 bolts, depending upon the configuration of the pipes. With 4 bolts installed, the WLL is 800 lbs….

    Add to cartLoading Done
  • The Light Source Mini-Claw Black MIB

    The Light Source Mini-Claw Black MIB

    $37.32

    The Mini-Claw has a lightweight profile and is used for hanging small lighting fixtures on truss or pipes. The Mini-Claw’s wrap around construction protects truss from being marred and supports the weight of the fixture as it is being secured. Fits from (1-1/4″ pipe) 1.66″ OD to 2″ OD truss tube. The Mini-Claw is a…

    Add to cartLoading Done
  • The Light Source Mini-Claw Aluminum Finish MIM

    The Light Source Mini-Claw Aluminum Finish MIM

    $36.04

    The Mini-Claw has a lightweight profile and is used for hanging small lighting fixtures on truss or pipes. The Mini-Claw’s wrap around construction protects truss from being marred and supports the weight of the fixture as it is being secured. Fits from (1-1/4″ pipe) 1.66″ OD to 2″ OD truss tube. The Mini-Claw is a…

    Add to cartLoading Done
  • The Light Source Mini-Clamp Black Anodized Stainless fasteners (fits IV pole from 5_16 to 2 OD_8 mm-50 mm) MNB-IV

    The Light Source Mini-Clamp, Black Anodized, Stainless fasteners (fits IV pole from 5/16″ to 2″ OD./8 mm-50 mm) MNB-IV

    $25.74

    The Mini-Clamp IV with 18-8 stainless steel fasteners will fit any IV pole from 5/16″ to 2″ OD. (8 mm-50 mm) The convenient plastic handle makes it easy to install to the IV pole. Thousands of ventilators have now been equipped with the Mini-Clamp IV.

    Add to cartLoading Done
  • The Light Source Tent Beam Clamp 4 Silver MTBC4

    The Light Source Tent Beam Clamp 4″ Silver MTBC4

    $167.31

    Mega Tent Beam Clamps The Mega Tent Beam Clamps opens 5-1/4″ to fasten securely into the Keder track slot in free span tent beams. The 4″ Mega-Tent Beam Clamp engages the Keder track slot on both sides for 4 inchs. 4″ Mega-Tent Beam Clamp has a centered hole for a 5/8 inch shackle, and two…

    Add to cartLoading Done
  • The Light Source Tent Beam Clamp 8 Silver MTBC8

    The Light Source Tent Beam Clamp 8″ Silver MTBC8

    $296.01

    Mega Tent Beam Clamps The Mega Tent Beam Clamps opens 5-1/4″ to fasten securely into the Keder track slot in free span tent beams. The 8″ Mega-Tent Beam Clamp engages the Keder track slot on both sides for 8 inches. The 8″ Mega-Tent Beam Clamp has a centered hole for a 5/8 inch shackle, and…

    Add to cartLoading Done
  • The Light Source Mega-Truss Pick 12 Truss 1-Ton Black Anodized MTP12B

    The Light Source Mega-Truss Pick, 12″ Truss, 1-Ton, Black Anodized MTP12B

    $244.53

    The Mega-Truss Pick is CNC machined from solid 1″ × 6″ 6061 T-6 aluminum billet. Two pockets cut into the Mega-Truss Pick have coupler style aluminum pivoting links, half inch swivel bolts, and our solid wing nuts to completely wrap around the truss tube to secure it. The Mega-Truss Pick has one top and one…

    Add to cartLoading Done
  • The Light Source MEGABATTEN Connector Strip PDP Assembly 16 2 Circuit Matte Black PDP15B192-2L12X12-EX16R

    The Light Source MEGABATTEN Connector Strip PDP, Assembly, 16′ 2 Circuit, Matte Black PDP1.5B192-2L12X12-EX16R

    $1,053.67

    Power and data in a pipe with the new MEGABATTEN connector strip. The patent pending MEGABATTEN dispenses with the traditional connector strip square or rectangular electrical enclosures by placing all of the wiring inside the pipe. Fixtures and scenery may be located over the entire length of the MEGABATTEN, even directly over unused outlets. Pockets…

    Add to cartLoading Done
  • The Light Source MEGABATTEN Connector Strip PDP Assembly 24 3 Circuit Matte Black PDP15B288-3L12X18-EX16R

    The Light Source MEGABATTEN Connector Strip PDP, Assembly, 24′, 3 Circuit, Matte Black PDP1.5B288-3L12X18-EX16R

    $1,634.03

    Power and data in a pipe with the new MEGABATTEN connector strip. The patent pending MEGABATTEN dispenses with the traditional connector strip square or rectangular electrical enclosures by placing all of the wiring inside the pipe. Fixtures and scenery may be located over the entire length of the MEGABATTEN, even directly over unused outlets. Pockets…

    Add to cartLoading Done
  • The Light Source Universal Plasma Mount Black Anodized Set of two mounting bars and two Slim-Couplers UPB

    The Light Source Universal Plasma Mount, Black Anodized, Set of two mounting bars and two Slim-Couplers UPB

    $257.40

    The Plasma Universal Mount supports a plasma or LCD screen on a pipe, 12″, or 20.5″ Truss. One Slim-Coupler is provided to fasten per mount. The two mounting bars are bolted directly to the plasma screen with two 8mm or 10mm bolts per bar. (Bolts are not included.) The support bolt holes are drilled for…

    Add to cartLoading Done
  • The Light Source MEGABATTEN Connector Strip PDP Assembly 8 1 Circuit Matte Black PDP15B96-1L12X6-EX16R

    The Light Source MEGABATTEN Connector Strip PDP, Assembly, 8′ 1 Circuit, Matte Black PDP1.5B96-1L12X6-EX16R

    $582.34

    Power and data in a pipe with the new MEGABATTEN connector strip. The patent pending MEGABATTEN dispenses with the traditional connector strip square or rectangular electrical enclosures by placing all of the wiring inside the pipe. Fixtures and scenery may be located over the entire length of the MEGABATTEN, even directly over unused outlets. Pockets…

    Add to cartLoading Done
  • The Light Source TC Plasma Screen Mount Set of 2 Silver TPM

    The Light Source TC Plasma Screen Mount, Set of 2, Silver TPM

    $238.09

    The TC Plasma Mount is used to hang a plasma or LCD screen on a box truss or pipe. A pair of mounts are provided, one for each side of the screen. The screen is easily bolted to the TC Plasma Mounts with 6mm, 8mm, or 10mm bolts. (Bolts are not included.) The support bolt…

    Add to cartLoading Done