Control4 C4-DIN-8DIM-E 8 Channel Dimmers

The Control4® 8-Channel Dimmer controls up to eight loads from one module in the Control4® system. It is an adaptive phase dimmer, so each channel supports a variety of load types including incandescent, halogen, electronic low-voltage (solid-state) transformer, magnetic (iron core) low-voltage transformer, fluorescent, compact fluorescent, LED, and motor. The 8-Channel Dimmer automatically detects the load type and sets the appropriate dimming mode.

• Controls up to eight loads and supports a variety of load types
• Each channel can be set to different dimming modes including Switch mode, Forward Phase mode, Reverse Phase mode, or Autodetect mode
• Channel buttons allow for toggling on/off or ramping up/down a load
• Channel status LEDs indicate whether a load is on, off, or in short-circuit fault
• Module override button allows toggling between the module override scene and all channels off or setting the module override scene to current channel levels
• Module status LED indicates if module power is on with normal operation, off, or in thermal overload
• Link/Activity LED indicates system link status, communication activity, or firmware update status
• Reset button can be use for factory default or various IP configuration settings
• Auxiliary override connection allows a standard line-voltage toggle switch to control the attached lights before the control system is installed or in case the controller malfunctions
• Module can be installed in either a Control4® 5- or 2-slot panel or a third-party DIN rail panel